Juniper Networks Quantum Plug-in (now Neutron)
The Juniper Networks plug-in for OpenStack Quantum enables you to use the DMI/NETCONF interfaces on Juniper Networks switches to orchestrate virtual networks. The plug-in uses Open vSwitch (OVS) as the virtual switch.
OpenStack release supported: Folsom
To orchestrate virtual networks, the plug-in requires you to specify the Juniper Networks switch port to node (compute and Quantum server) NIC mapping information. See Configuring Nodes for information about specifying this mapping information.
The plug-in supports the following Juniper Networks switching platforms running Junos OS Release 11.4R1.6 or later. For more information about these platforms, see http://www.juniper.net/us/en/products-services/switching/.
|Documentation||Juniper Quantum Documentation|
|Categories||Networking > Control & Management Software > SDN Controller and Network Virtualization Platforms|
Use of the SDxCentral service directory is governed by our Terms of Service, including without limitation those sections under the headings "CONTENT", "LICENSING AND OTHER TERMS APPLYING TO CONTENT POSTED ON THE SDXCENTRAL SITES", "INDEMNITY; DISCLAIMER; LIMITATION OF LIABILITY" AND "COPYRIGHTS". Under no circumstances will SDxCentral be liable in any way for any Content, including, but not limited to, liability for any errors or omissions in any Content or for any loss or damage of any kind incurred as a result of the use of any Content posted, emailed or otherwise transmitted via the Sites.