HTCA-6600 is designed in 6U, with six CPU blades and a combination of six Ethernet NI/switch blade slots. While sharing the same CPU and memory configurations as HTCA-6200, two Intel® Xeon® E5-2690 v3/v4 CPUs and sixteen DDR4 R-DIMM sockets for each blade as stated above, HTCA-6600 comes with six front-cabling, swappable Ethernet NI/switch blades. The top 2 blade slots are reserved for switch or Ethernet NI blades, while the other four slots are solely used for Ethernet NI blades. The Ethernet NI blade comes with the same configuration as HTCA-6200, which delivers thirty-two 10GbE ports. As the higher-end model, HTCA-6600 is designed with switch blade and CPU blade redundancy. In case one of the blades is encountered with failure, the other will take all the work loads.
Use of the SDxCentral service directory is governed by our Terms of Service, including without limitation those sections under the headings "CONTENT", "LICENSING AND OTHER TERMS APPLYING TO CONTENT POSTED ON THE SDXCENTRAL SITES", "INDEMNITY; DISCLAIMER; LIMITATION OF LIABILITY" AND "COPYRIGHTS". Under no circumstances will SDxCentral be liable in any way for any Content, including, but not limited to, liability for any errors or omissions in any Content or for any loss or damage of any kind incurred as a result of the use of any Content posted, emailed or otherwise transmitted via the Sites.